Products

• NXP T4240 processor with twelve dual-threaded PowerPC e6500 cores at up to 1.8 GHz (alternate processor T4160)
• 6U VPX module
• Conduction or air cooling
• Up to 24 GB of up to DDR3-2133 ECC SDRAM in three channels
• Up to 512 MB of NOR flash (with redundancy)
• Up to 64 GB of CPU NAND flash
• Up to 64 GB of SATA NAND flash (optional)
• Gen3 (8 GHz) PCI Express
• x4 PCI Express lanes from CPU to switch
• PCI Express to XMC sites (x4 to XMC0, x8 to XMC1)
• Four x4 (x16 total) PCI Express lanes from switch to P1
• 10GbE XAUI to P2 (optional)
• Two 10GBASE-T to front panel using I/O mezzanine card (optional)
• Two SATA 3.0 Gb/s ports
• Two USB 2.0 port
• Four Gigabit Ethernet ports
• Two RS-232/422/485 serial ports
• Two PrPMC/PrXMC interfaces

Processor

• NXP T4240 processor
• 12 dual-threaded PowerPC e6500 cores at up to 1.8 GHz
• 2 MB L2 cache per quad
• 512 kB platform cache per channel (3)
• IEEE 754 Floating-Point Unit (FPU) support
• 128-bit AltiVec engine per core

Alternate Processor Configurations

• T4160 processor with eight dual-threaded Power Architecture® e6500 cores up to 1.8 GHz
• T4080 processor with four dual-threaded Power Architecture® e6500 dual cores up to 1.8 GHz

Memory

• Up to 24 GB of up to DDR3-2133 ECC SDRAM in three channels
• Up to 512 MB of NOR flash (with redundancy)
• Up to 64 GB of CPU NAND flash
• Up to 64 GB SATA NAND flash (optional)

IPMI

• Onboard management controller
• VITA 46.11 Tier 1 and Tier 2 IPMI Controller (IPMC)

VPX

• VITA 46.0
• VITA 46.11 (System Management on VPX)
• VITA 46.4 (Four x4 PCIe lanes to P1)
• VITA 46.7 (Two 1000BASE-BX Ethernet ports to P4)
• VITA 46.9 (XMC and PMC I/O to P3, P4, P5, P6, mapping P3w1P4-P64s+X12d+X8d)
• Up to two USB 2.0 ports to P6
• Two SATA ports capable of 3 Gb/s to P6
• 10GbE XAUI to P2 (optional)

XMC/PrPMC

• PCI-X (64/32-bit, 100/66 MHz)
• PCI (64/32-bit, 66/33 MHz)
• PCI Express to XMC sites (x4 to XMC 0, x8 to XMC 1)

Front Panel I/O (Optional)

• Dual RS-232 serial ports
• Gigabit Ethernet port
• USB 2.0 port
• General-purpose LEDs
• Two 10GBASE-T to front panel using I/O mezzanine card

Software Support

• Wind River VxWorks BSP
• Linux BSP
• Green Hills INTEGRITY-178 tuMP BSP
• Contact factory for availability of QNX Neutrino and LynuxWorks LynxOS BSPs

Physical Characteristics

• 6U VPX-REDI conduction- or air-cooled form factor
• Dimensions: 233 mm x 160 mm
• 0.8 in. pitch
• 1.0 in. pitch Two-Level Maintenance (2LM)

Environmental Requirements

Contact factory for appropriate board configuration based on environmental requirements.

• Supported ruggedisation levels (see the X-ES Ruggedization Chart): 1, 3, 5
• Conformal coating available as an ordering option
• Thermal performance will vary based on CPU frequency and application

Power Requirements

• Power will vary based on configuration and usage. Please consult factory.