Products

• Supports 2nd and 3rd generation Intel® Core™ i7 processors
• Quad- or dual-core processor with Intel® Hyper-Threading Technology
• 3U VPX (VITA 46) module
• OpenVPX™ standards based
• Ruggedized Enhanced Design Implementation (REDI) per VITA 48
• Conduction or air cooling
• Up to 8GB of DDR3-1600 ECC SDRAM in two channels
• 32 MB of NOR boot flash
• Up to 16 GB of NAND flash
• XMC/PMC interface with rear I/O and limited front-panel I/O support
• Two Gen2 Fat Pipe P1 fabric interconnects
• Two RS-232/422/485 serial ports
• Two HDMI/DVI-D or Dual-Mode DisplayPort interfaces
• Two XMC (P16) SATA ports capable of 6 Gb/s for storage mezzanine
• Two SATA ports capable of 3 Gb/s and two USB 2.0 ports
• Wind River VxWorks BSP
• Linux BSP
• Microsoft Windows drivers
• Contact Sarsen Technology for availability of Green Hills INTEGRITY, QNX Neutrino, and LynuxWorks LynxOS BSPs

Processor

• Quad- or dual-core Intel® Core™ i7
• Intel® Turbo Boost Technology
• Intel® Hyper-Threading Technology
• AVX instruction set extensions
• Integrated with Intel® QM67 chipset
• Dual-channel integrated memory controller
• Integrated high-performance 3D graphics controller

Quad-Core Processor Configurations

• Core™ i7-3612QE: 2.1 GHz, 6 MB cache

Dual-Core Processor Configurations

• Core™ i7-2655LE: 2.2 GHz, 4 MB cache
• Core™ i7-2610UE: 1.5 GHz, 4 MB cache
• Core™ i7-3555LE: 2.5 GHz, 4 MB cache
• Core™ i7-3517UE: 1.7 GHz, 4 MB cache

Memory

• Up to 8 GB of DDR3-1600 ECC SDRAM in two channels
• 32 MB of NOR boot flash
• Up to 16 GB of NAND flash

Graphics

• Integrated high-performance 3D graphics controller
• Two HDMI/DVI-D or Dual-Mode DisplayPort interfaces

VPX (VITA 46) P0 I/O

• I²C port

VPX (VITA 46) P1 I/O

• x4 PCI Express Fat Pipe interface to P1.A
• x4 PCI Express Fat Pipe interface to P1.B
• Two 1000BASE-BX Gigabit Ethernet ports (or one 10/100/1000BASE-T port to P1 and one port to P2)
• XMC P16 I/O, mapping P1w9-X12d per VITA 46.9

VPX (VITA 46) P2 I/O

• One 10/100/1000BASE-T Gigabit Ethernet port
• Two SATA ports capable of 3 Gb/s
• Two USB 2.0 ports
• Up to two RS-232/422/485 serial ports
• 3.3 V GPIO signals
• Two HDMI/DVI-D or Dual-Mode DisplayPort interfaces
• Optional I/O can be replaced by a subset of P2w1-P64s I/O, Wafer 1-8 is NC

XMC/PMC Site

• 32-bit, 33 MHz PCI bus (PMC interface)
• x4 PCIe port (XMC interface)
• Two SATA ports capable of 6 Gb/s (XMC interface)

Security and Management

• Optional Trusted Platform Module (TPM)
• Non-volatile memory write protection

Software Support

• Wind River VxWorks BSP
• Linux BSP
• Microsoft Windows drivers
• Contact Sarsen Technology for availability of Green Hills INTEGRITY, QNX Neutrino, and LynuxWorks LynxOS BSPs

Physical Characteristics

• 3U VPX-REDI conduction- or air-cooled form factor
• Dimensions: 100 mm x 160 mm
• 0.8 in. pitch without solder-side cover
• 0.85 in. and 1.0 in. pitch with solder-side cover

Environmental Requirements

Contact factory for appropriate board configuration based on environmental requirements.

• Supported ruggedisation levels (see the X-ES Ruggedization Chart): 1, 3, 5
• Conformal coating available as an ordering option

Power Requirements

• Power will vary based on configuration and usage.