Products

• Xilinx Virtex UltraScale 65/80/95 or Kintex UltraScale 95
• Up to two PCIe x8 interfaces supporting Gen1, Gen2, or Gen3
• Two QSFP28 cages for 2x 100GbE, 2x 40GbE, 8x 25GbE, or 8x 10GbE
• Memory: up to 32 GBytes of DDR4 SDRAM with ECC (x72)
• Board Management Controller for Intelligent Platform Management
• Precision timestamping support
• Utility I/O: USB 2.0

Specifications

• Up to 940K logic elements
• Up to 60 Mb of embedded memory
• Up to 4 integrated PCIe cores
• Up to 768 DSP slices with 27×18 multipliers
• Xilinx UltraScale FPGA
• Virtex UltraScale 65/80/95
• Kintex UltraScale 95
• Multi-gigabit transceivers
• Virtex: 8 GTY at 30.5 Gbps and 17 GTH at 16 Gbps
• Kintex: 25 GTH at 16 Gbps

• Two banks of up to 16 GB DDR4 (x72)
• Flash memory for booting FPGA

• Two x8 Gen1, Gen2, Gen3 interfaces direct to FPGA (One x8 interface in a standard slot; two x8 interfaces requires bifurcated slot)

• Micro USB port (USB 2.0) for BMC access and programming Flash

• 2 QSFP28 (zQSFP) cages on front panel connected directly to FPGA via 16 GTY transceivers (GTH for Kintex)
• Each supports 100GbE, 40GbE, 4x 25GbE, or 4x 10GbE (100GbE, 25 GbE Virtex only)
• Backward compatible with QSFP and can be optionally adapted for use as SFP+

• 1 PPS input/output
• Reference clock input/output

• Voltage, current, temperature monitoring
• Power sequencing and reset
• Field upgrades
• FPGA configuration and control
• Clock configuration
• I2C bus access
• USB 2.0
• Voltage overrides

• Low profile (Half-height, half-length) PCIe slot card; x16 mechanical

Development Tools

• FPGA Development Kit:
• Physical interface components
• Board, I/O, and timing constraints

• Software components and drivers

• Vivado® Design Suite
• USB to JTAG converter